| Operating platform 200 × 200 mm Max. load 10KG Peak acceleration 20 to 1500G (customization acceptable) Pulse duration 0.5~11ms (customization acceptable) Equipment dimensions 560×670×2390mm Equipment weight 650 kg Power required 220VAC±10％ 50Hz,2kVA Measuring system Input channels 2 channels Sampling frequency 192KHz Pulse duration 50-1ms Communication interface USB2.0 Supportive standard ISO, UN38.3,MIL-STD-810, user defined Operating system Microsoft Windows7/8 System acceleration sensor Brand LAB Model 23108 Output mode Charge type Sensitivity 3.93pC/g Frequency range 0.5 to 12KHz Acceleration range ±2500G Operating environment -40 to +160℃ III Introduction to Equipment Performance 1 Operating platform High-strength imported aluminum alloy operating platform. 
3 Lifting height control The lifting height is measured by a photoelectric encoder module installed on the base, and the photoelectric encoder module has high accuracy, strong anti-interference capability and high reliability, thus ensuring shock repeatability. 4 Braking system Air brake and strong friction brake are applied to prevent secondary shock braking, thus ensuring prompt and reliable braking to prevent secondary bounce. 5 Buffer system The buffer system is consisted of a base, a damper and a gasbag. The buffer system can reduce the shock force transferred from the working platform to the ground. 6 Waveform generator 6.1 Plate-typed half sine wave: for achieving different shock pulse widths (1 to 30ms) Trapezoidal wave: special cylinder 7 Safety device Emergency stop switch: It switches off the circuit in emergency cases by forcibly disconnecting welded contacts of the actuating mechanism. Optional: safety mat 8 Introduction to the shock measuring system and its features The system conforms to MIL-STD-810, GJB-150-18-86 and IEC68-2-27 standards, and has accurate and prompt shock wave capture capability. The max. sampling rate is 1MHz, therefore, you need not worry about omission of minor shock events. The system is also an integrated solution, you need not be busy with waveform viewing and recording, as the system can capture shock event and generate report, more importantly, the system can provide you with shock response spectrum analysis (SRS) to facilitate effective assessment of potential damage from shock pulse to the actual system. At last, the auxiliary analysis on force deformation and shock response can enable to understand more details about the shock results. Features of the measuring system It conforms to MIL-STD-810, GJB-150-18-86, IEC68-2-27 and DELL standards. The max. sampling frequency is up to 1MHz. The max. testing acceleration is 100000gn. The min. testing pulse width is 0.1ms. It has the features of multi-frame waveform recording and playback. It supports internal and external triggering. Analysis functions: 
Transient capture of shock waveform You can obtain single or multiple pulses with transient capture. The system can automatically analyze data of shock pulse, including peak value, pulse width, rate of speed change and head injury index (HIC), automatically match the captured pulse waveform to ideal waveform, and compare their deviation. Shock response spectrum analysis The shock response spectrum analysis enables assessment on potential damage arising from shock, thus providing basis for designing shock resistance of products. The system can perform SRS analysis on each shock pulse, and compare the deviation between actual SRS and objective SRS. Other analysis Essential analysis in shock test includes force deformation analysis, shock response demonstration and rotary shock analysis. Peak force, deformed peak value, power and energy produced by pulse are calculated in the force-deformation analysis. Tools for learning shock response spectrum are provided in the shock response demonstration. Rotary shock analysis is used for rotary shock machines or other rotary control events, and the signal can be obtained by measuring and calculating axial acceleration V Site requirements 1. Power supply: 220V±10% 50Hz 2. Independent isolated power supply 3. Air supply:0.5--0.8MPa 4. Using environmental conditions: Temperature Rang::RT℃～35℃； Humidity range:0--85RH%； Installation location: flat ground, no corrosive gas surrounded, less dust. 5. Appropriate unloading, handling tools shall be prepared by customer. Hot Tags: hskt10 mechanical shock tester, China, manufacturers, suppliers, factory, custom, wholesale, IEC61032 Figure 17 Test Bar 43, EN15091 LCD Touch Screen Electrical Appliance Tester, IEC60950 Flammability Testing Equipment, Ingress Protection Test Equipment, IPX7 Water Supply And Control System, Battery Falling Tester |
